Eterra Razor Sickle Bar Mower for Skid Steer Loaders 

Responding to the needs of customers, Eterra has developed the Razor Sickle Bar Mowing Attachment for Skid Steer Loaders. The performance and quality will meet even the highest standards. A long standing problem for many skid steer owners has been not being able to cut material along side of the road. Another common question that many people have is "How can I cut hay and brush while driving forward?" The answer is now here, the Eterra Sickle Bar Mowing Attachment. This is a product that will provide you with many years of road side clearing at an affordable price. This Sickle Bar is fitted for use on Skid Steer loaders. To operate this cutter at an optimal performance, your machine must have a hydraulic flow rate of 15 GPM - 25 GPM @ 3000 PSI Rated.

Select Product Options Above

• Select Sickle Bar Length
• Select Attachment Control Device 

Features

• 7' and 9' foot cut width options
• 36 Replaceable Cutter Teeth (9 Foot)
• Can cut below 45 degrees flush to the ground and at 110 degrees to the ground allowing you to cut inside of ditches and along roadways
• Uses a heavy non-clogging style sickle
• 100% hydraulically operated - 15 GPM - 25 GPM @ 3000 PSI Rated
• Break-away bar so you do not damage the unit if you catch it on a rock or fence post
• Fully replaceable sickles - Bolt on
• Hydraulic lift and angle - 45 degrees to 110 degrees to the ground

Testimonial from the Owner of Skid Steer Solutions

"I set out down our roadside and made one pass with the sickle following the contour of the road. I was able to mow everything back and away from the roadway 7 feet - 9 feet. Up until now I had nothing that could do this as it is next to impossible to hang a mower beside a skid steer as they are just too heavy. The sickle only weighs 100 lbs. so it does not affect the balance of the machine one bit.

The next path was with the sickle fully extended and down in the ditch. This time instead of just cutting grass, I was able to cut small Alder trees that tend to grow up and out of the ditch and scratch our vehicles as we drive by. This is a monumental feat as we have live with this problem for 13 years. The sickle would cut up to 2 inch trees. If they were too big, the sickle would not accept the tree and would just push back. If I forced it, the trip mechanism would kick the blade out so I could not damage anything. I would just back up a few feet to reset and was on my way.

The next job was the trees that line our main driveway. The branches up high droop down onto our vehicles and scratch the roof as we go by. I use a tree shear to get what I can but cannot reach high enough to get the base of the branch so they keep coming back. With the Skid-Sickle, I have the 7 feet to 9 feet of length of the sickle plus the lift height of the skid steer to give me a 17 foot reach. This was the best grooming our driveway has ever seen. In only a few minutes, it looks extremely professional.