EX-30/40/50 Flail Mower Blade | Eterra
See more by Eterra Attachments
SURCHARGES:
Over the past several months we have seen a steady increase in pricing from our suppliers due to the current volatile economic landscape. While we have worked hard to absorb as many of these expenses as possible, we have reached a point where we must pass a portion of these increases on to the marketplace. As you will note from our revised pricing, we have done so in the form of a surcharge to reflect in full transparency the impact of these recent increases on our products. We will continue to closely monitor our input costs as well as work with our suppliers to offer the most competitive pricing we can going forward.
Thank you for your understanding and continued support.
SKID STEER SOLUTIONS
Product overview
EX-30/40/50 Flail Mower Blade - 2.25 lb
Used on Eterra EX-30/40 & 50 Flail Mowers installed on excavators.
Quantity (1)
Quantity Required for a Full Set
EX-30 - (20)
EX-40 - (20)
EX-50 - (28)
Hardware Requirements
When changing blades, you should examine the blade bolts carefully and replace if more than 25% of the bolt is worn away. Failure to do so can allow the bolt to fail which will release the blade. The blades can fly as far as 100 yards form the mower causing property damage or injury to bystanders. Please be safe and change all of the hardware when you change your blades.
Blade Bolts - Use one for each pair of blades. ie - 20 Blades equals 10 blade bolts.
Blade Bolt Castle Nut - Use one for each pair of blades. ie - 20 Blades equals 10 blade bolt castle nuts.
Blade Bolt Spring Pin - Use one for each pair of blades. ie - 20 Blades equals 10 blade bolt spring pins.
Blade Bolt Washers - Use one for each blade. ie - 20 Blades equals 20 blade bolt washers.