Complete 5 Piece Track Kit | Track Handler
SURCHARGES:
Over the past several months we have seen a steady increase in pricing from our suppliers due to the current volatile economic landscape. While we have worked hard to absorb as many of these expenses as possible, we have reached a point where we must pass a portion of these increases on to the marketplace. As you will note from our revised pricing, we have done so in the form of a surcharge to reflect in full transparency the impact of these recent increases on our products. We will continue to closely monitor our input costs as well as work with our suppliers to offer the most competitive pricing we can going forward.
Thank you for your understanding and continued support.
SKID STEER SOLUTIONS
Product overview
Track Handler 5 Piece Track Kit (Remove, Replace, Install)
Description
Track Handler Kits are the safest and most convenient way to change or replace your skid steer or excavator tracks. For every hour that your machine is out of service you are losing money. This track kit allows you to service your machine on the spot without the need to take employees off the job or waiting for an expensive service call. The track handler products work on all major brands of skid loader, excavator, mini excavator, and compact skid loader equipment.
Also available in a 3 Piece Kit.
Preparation:
Preparing your machine for track removal or replacement is a very critical step. Safety is always the top priority when lifting the machine off the ground. Make sure your machine is secure and only off the ground by 3-4". Only one side of the machine should be off the ground during this process. Some machines require more clearance than that, you want to check you machine manual for instructions.
Compatibility:
Track Handler products (armadillo mat) are compatible with newer torsion style suspension and rigid suspensions that require a grease fitting to tighten the track. Dis-assembly of the front idler is required for open design undercarriage used on ASV machines and machines using ASV track assemblies.
Includes:
- Armadillo: A flexible reinforced tough rubber mat (3/4" thick) with hot rolled steel bars securely fastened to both side of the mat. This part runs between the inside of the track and the idler for taking off and putting on tracks.
- Hammerhead: Steel uniquely shaped attachment that mounts onto the Power Bar with inset screws that securely tightens to the bar. When used with the Power Bar, this tool makes pulling off tracks and prying them back onto the idler or sprockets safer because it creates more leverage points to take advantage of.
- Beaver Tail: This cold rolled steel uniquely shaped gripping tool used with a ratchet strap to exert pressure to pull the track back in place of the idler. This greatly reduces the work of manually handling the tracks back onto the machine
- Power Bar: 42" Steel pry bar with large ergonomically formed handle. This works perfectly with out Hammer Head attachment to gain the appropriate amount of leverage used for the safest way possible for moving large heavy tracks into place.
- Ratchet Strap: Nylon strap with double hooks for better attaching the Beaver Trail, 1000 lbs. capacity. 1.5" strap width. Size and color may very.
What's Included?
- 5 piece track kit
- Owner's manual
Installation Tips
