Sidney HTC Skid Steer Tree Shear

The Sidney HTCX Rotating Tree Shear for skid steers has multiple uses, you can cut a tree down, pivot the shear from inside your cab and cut the tree into sections. Pick up the sections and carry them away. Reach up and trim a standing tree. Clear downed trees quickly and easily.

The "World's Best Tree Shear" is just what Sidney says it is. The Sidney Tree Shear is a commercial grade tree shear built exclusively to be used with Skid Steer Loaders. It has the standard rotation feature that has made this model of shear so popular, but it is now more powerful than ever. The HTC has the largest cylinder and porting of any tree shear abailable. The larger porting and valving allow the flow of your machine to increase the speed of the cut. In addition, the HTC uses a 5.5" bore cylinder on the 14” model, and a 6” on the 16” model which increases the overall cutting power by 23% to 40% over our previous models.

This feature has actually been helpful to people with less powerful hydraulic systems because it gives them more power overall where they need it most.  Example: Your machine has only 2250 PSI of pressure. You can boost the power by using the commercial model because of the larger cylinder size. It will run a bit slower because of the larger porting and cylinder, but you will end up with 23% more power than the same machine with the TB-02. 

Select Product Options Above

• Select Size
• Select Attachment Control Device
• Universal Skid Steer Plate Included
• 1/2" Flat-Faced Couplers and Hoses Included

What is so useful about this shear?

• Cut a tree down, pivot the shear from inside your cab and cut the tree into sections.
• Pick up the sections and carry them away.
• Reach up and trim a standing tree.
• Clear downed trees quickly and easily.

What can it cut?

• Hardwood trees (Green) up to 14" in diameter. 
• Larger softwood trees.
• Jaws open large enough to allow a 22" tree, however we cannot guarantee it will cut as it is dependent on the hardness of the tree.
• Limitless uses in logging and timber operations.

What can it not cut?

• Tires
• Steel
• Scrap
• Wire

Since your machine has only one set of hydraulics, the shear has an on-board solenoid valve that switches the hydraulics from shear mode to pivot mode. Everything is supplied and you do not need to provide anything except about an hour for installation.

Plug and play is now available for the Sidney Tree Shear for Bobcat machines e/w 14 pin connectors. Cat/ASV 8 pin plug and play also available. New Holland and John Deere 14 Pin connectors just added. Our attachment can plug directly into your machine and operate from your stick controls.