Now you can run many powered agricultural attachments on your skid steer with very little or no modification needed at all. The EZ-3-Point PTO is an upgraded EZ-3-Point with special hitch arms, a rotating motor mount, motor, bypass valving and all the hosing you need to turn your skid steer into a tractor capable of attaching 3-point attachments from Category 0 - 2. 

This is amazing and only available from Skid Steer Solutions.  Why, because we designed it and only we sell it.  It is a quick hitch design that mounts easily to the front of your skid steer just like a bucket would. The only difference is that this attachment mimics a 3-Point similar to those found on tractors.

Imagine being able to run a Brush Hog, Roto-Tiller, Snow Blower, Cement Mixer, Chipper, Rake, Box Blade, Bale Spear, Manure Forks, Scoop or what have you on your skid steer? Think of the money you will save by being able to use inexpensive agricultural attachments on your skid steer.

Yes, these attachments have been field tested and they work with little effort on your part.  We know of two competitors that make a similar product.  Here is the difference.

Ours:

• Modular and upgradeable
• Adjustable lift arms from Cat 0 - Cat 2
• Rotating Motor so you can always align your PTO shaft which saves your U-joints and horsepower.
• Quick Hitch design so you can connect your attachments from inside your cab.
• Bypass circuit so your attachments spin down safely with no risk of damage.

Theirs:

• One piece design so nothing is modular.
• Fixed motor so you cannot align your PTO shaft.
• Fixed lift arms.  You get what you get.  No adjustment.
• Fixed manual hitches or hitch balls so you have to muscle the attachment onto the lower links while off of the machine.  This is just plain stupid.  Why not use your machine to your benefit?  Isn't that what you bought the machine for in the first place?  To save effort?
• No bypass circuit.  You have to add your own over-run clutch.  This adds length to your unit and makes it harder to attach some implements.

We even know of one unit that mounts the motor under the quick tach.  We owned one of these and were constantly dragging the motor through the dirt and finally tore the motor right off of the plate. 

Our unit is designed by people that use skid steer loaders, thus we have the upper hand to some engineer in an office.  Our equipment is functional and does what we say it will.  Our rated horsepower outputs are actually measured and not calculated.  We allow for losses to heat and friction which many others do not.  Our unit may show lower HP, but it is because we are giving you real world measurements.  Isn't that what really counts?

Optional: Choose when adding to shopping cart.

Cat 1 Links:
Main quick hitch links will be sized to accomodate 7/8" main links.  This is the most common size for compact tractor attachments.  For Cat 0, you would add bushings to your pins and move the hitch arms inward.

Cat 2 Links:
Main quick hitch links will be sized to accomodate 1 1/8" main links.  For Cat 0, you would add bushings to your pins and move the hitch arms inward.