Cab Heater - Fits all models:

The price listed is for a Maradyne cab heater that uses your existing cooling system to draw heat.  Our price includes the heater and switch kit.  We do not supply the hoses or hardware kit to install this unit into your machine.  We offer the water shut-off kit as an option, however check your block as our kit is SAE, while many modern blocks use metric threads.

You need to have some mechanical expertise to do this and we want you to understand that this will take you about 5 hours to install.  There is no easy way to do this. You will need an open spot on the floor to mount the heater. You will then have to break into the cooling system and run the lines that you will supply to the sides of the heater. You have to allow for the extra length when you lift the cab up. Once this is done you will be very toasty. We were going to offer the electric model but it is 1/10th the output and feedback from the field has been poor, so unfortunately if you want heat, you are going to have to work for it.

Specifications:

• Dimensions - 7" H x 7" W x 7.25" D
• 12,500 BTU output
• Weight 20lbs.
• High Efficiency
• Tube and fin water coil has lifetime warranty
• Multi-speed fan control
• 5 blade aluminum fan blade
• Shut-off kit includes clamps, shut-off valve, return coupling and reducers

Photos of a typical install below.

http://www.skidsteerforum.com/

Specifications: