Pat's EZ Change Coupler Cat 1-2

New Category 1-2 EZ-Change Hitch system that connects to the bottom links of your existing three point and allows you to still move your lift arms in and out to adjust for implement hitch widths. The Category 1-2 style hitches are used where your lower pins measure 7/8" and you want to connect to Category 1 implements with a pin diameter of 1-1/8” in diameter.

We are offering 4 varieties of these so please read carefully so you get what you need.

The four varieties are.

The single category couplers are the most common, but if you have a tractor that is a different category than most of your attachments, you can use one of our adaptor hitches to change it without permanently altering your tractor lower arms.

Please read on for more descriptions

Easy Change System Category 1-2

• Fits lift arms ¾'' x 2 ½ - 3''
• Requires approximately 4'' of straight arm
• Latch is spring loaded to assure slide stays in closed position

Description:
If you own a tractor with a standard 3 point connection, you understand just how frustrating it can be to connect your attachments while sitting in the seat. These links virtually eliminate that difficulty by taking your standard ball connections and changing them into a quick hitch with spring loaded latches. Rather than lock the system together like many quick hitch designs have done, these hitches mount on your existing links and allow your lower links to still swing from side to side if required. This gives you full adjustability. If you want to lock the links in place, an additional locking arm is available that works in conjunction with these hitches. Contact us for more detail.

Fits almost all compact tractors.

If your lower link pins measure 7/8” in diameter, use the Category 1 links.

If your lower link pins measure 1-1/8” in diameter, use the Category 2 links.

This is a top quality system that is not only used for tractors, but is also used on our Skid Steer 3 Point PTO system. It has to be tough to work with a skid steer.