The EZ-PTO-LTD is designed specifically for today's High Flow skid steer loaders with an auxiliary hydraulic output of 31 GPM to 39 GPM @ 3300 PSI.  It will provide up to 60 HP at maximum flow and pressure. 

This is an incredible feat to make this unit so compact and versatile while staying with our original unique design.  There is no other manufacturer that has put the commitment we have into such a product.  The amount of use we have put our units through and the testing that has occurred has been enormous.  It has all paid off with this product.  It can run most any Cat 0 - Cat 2 implement available with not even a shudder when put under strenuous loads.

As our motor is a high output, high torque unit it comes complete with a case drain.  The customer is responsible for installing a case drain on their skid steer if one is not already provided by the manufacturer.

Here is a comparison to what is available from our competitors:

Ours:

• 60 HP all in one motor with integrated 1 3/8" PTO Shaft
• Modular and upgradeable
• Adjustable lift arms from Cat 0 - Cat 2.
• Rotating Motor Mount so you can always align your PTO shaft which saves your U-joints and horsepower.
• Quick Hitch design so you can connect your attachments from inside your cab.
• Bypass circuit so your attachments spin down safely with no risk of damage.

Theirs:

• 20 HP max at a higher cost than ours.
• One piece design so nothing is modular.
• Fixed motor so you cannot align your PTO shaft.
• Fixed lift arms.  You get what you get.  No adjustment.
• Fixed manual hitches or hitch balls so you have to muscle the attachment onto the lower links while off of the machine.  This is just plain stupid.  Why not use your machine to your benefit?  Isn't that what you bought the machine for in the first place?  To save effort?
• No bypass circuit.  You have to add your own over-run clutch.  This adds length to your unit and makes it harder to attach some implements.

We even know of one unit that mounts the motor under the quick tach.  We tried one of these and were constantly dragging the motor through the dirt and finally tore the motor right off of the plate. 

Our unit is designed by people that use skid steer loaders, thus we have the upper hand to some engineer in an office.  Our equipment is functional and does what we say it will.  Our rated horsepower outputs are actually measured and not calculated.  We allow for losses to heat and friction which many others do not.  Our unit may show lower HP, but it is because we are giving you real world measurements.  Isn't that what really counts?

On May 6, 2006, we tested this unit with a 900 lb. 72" roto-tiller.  The performance was remarkable.  Pictures have been added.  We will be offering the LTD 3 point along with this tiller shortly as you can see this is a well built tiller that works well with our attachment.

Optional: Choose when adding to shopping cart.

Cat 1 Links:
Main quick hitch links will be sized to accomodate 7/8" main links.  This is the most common size for compact tractor attachments.  For Cat 0, you would add bushings to your pins and move the hitch arms inward.

Cat 2 Links:
Main quick hitch links will be sized to accomodate 1 1/8" main links.  For Cat 0, you would add bushings to your pins and move the hitch arms inward.