Category

Account

 Loading... Please wait...

PD-750 Skid Steer Post Driver Attachment | Eterra

$8,850.00 $8,450.00
(You save $400.00)
Free Shipping in the Continental USA
SKU:
ET-PD-750
Weight:
1,230.00 LBS
Availability:
Lead Time: 3 Weeks

Product Options

QTY

Eterra PD-750 Skid Steer Post Driver Attachment | Closeout

The PD-750 uses a high impact 750 ft. lb. gas charged concrete breaker powercell with a specially adapted mount and cup. The power that the PD-750 puts to the post is phenomenal.  Based on Eterra's popular S40 High Impact Breaker, the PD-750 harnesses this power to put posts where you need them FAST. This is a proven system with no rubber mounts to wear out and break.

All Cup Sizes Included with Purchase

Eterra's universal cup keeps you from having to buy several cups. All of the cup sizes you need are supplied with this unique uni-cup system with eyelets. Attach the proper eyelet for 4" sizing or 6" sizing. With no eyelets the PD-750 is sized for 11".

Also compatible with the Bradco Tilt Tach, allowing for tilt adjustment when working on uneven areas. Eterra's design works like a dream. It should, it was designed by Skid Steer people for Skid Steer people. 

Select Product Options Above
 
  • Select Optional Bradco Tilt Tach
  • Select Attachment Control Device (to operate Tilt Tach)
  • Select Optional 5-Foot Breaker Tool
  • Select Optional Weight Plate (500 pounds)
  • Select Optional Nitrogen Charge Kit

How It Works

Employing a nitrogen gas back head as the energy store, the piston is lifted directly into the gas using the hydraulic oil from the loader hydraulics. As the piston reaches the top of the stroke the hydraulic oil is permitted to exit the hammer allowing the nitrogen gas to decompress and driving the piston to the bottom of the stroke forcefully impacting the working tool. 

When tested with a Bobcat A770, the operator could fit an 11 foot post into the drive unit. This should work effectively for most of customer's requirements. 
 
The drive power is unheard of and the safety is a nice feature. No external moving parts flying around while you use it. Just a Nitrogen charged internal drive head. These skid steer post drivers are simple and effective.
 
Specifications
 
  • Compatible with the modern universal quick attach system
  • Recommended Hydraulic Flow: 10-25 GPM
  • Weight: 1230 pounds
  • Height: 65"
  • Width: 45"
  • Impulse Force: 750 pounds
  • For use with machines with minimum 1300 pound lifting capacity
  • Cup sizes: Up to 11"
Weight:
1230 lbs.
Width:
45"
Height:
65"
Impulse Force:
750 ft. lbs.
Driver Head:
8"
Plate Length:
N/A
Material:
High Alloy Strength Steel
Hydraulic Flow Requirement:
10-25 GPM
Recommended Machines:
Min. 1300 lb. Lift Capacity Loaders
Frequency:
N/A
Cup Sizes:
Up to 11"
Driver Height:
Skid Steer Main Pin Height Plus 4"
Charge Pressure:
290 psi

Product Videos

PD-550 Post Pounder Attachment for Skid Steer Loader - Introduction
  • PD-550 Post Pounder Attachment for Skid Steer Loader - Introduction
  • Skid Steer Post Driver - Eterra PD-550 Gas-Charged

Skid Steer Solutions, Inc. offers a 1-Year Limited NO-HASSLE Warranty on all attachment products and their accessories purchased from our website SkidSteerSolutions.com, please visit our warranty page for full details. Our warranty on parts and wear parts is dependent upon the manufacturer's warranty. Please visit our warranty page for more information. To learn about our returns policy, please visit our Shipping and Returns page for the full details.

Review & Questions