Loading... Please wait...

Mini Skid Steer Sickle Bar Boom Mower | Eterra

$6,000.00 $5,745.00
(You save $255.00)
Free Shipping in the Continental USA
450.00 LBS

Eterra SR-100 Mini Skid Steer Roadside Brush Cutter Attachment

Eterra has been creating some of the most exciting sickle bar cutters for skid steer loaders, tractors and excavators for over a decade. A typical day does not pass where we are not looking for new uses for our sickle cutters. We recently purchased a mini skid steer loader and found it very useful working close to our ditches and ponds without tearing up the ground or leaving big divots. This got us thinking that we should be able to make up a mini boom cutter that could easily work on our mini skid loader and allow us to side cut these areas. Sure enough, the proto-type worked and we were off to the races with another winning attachment.

The SR-100 uses our Pitman style 5 foot cutter that we designed over a decade ago and have used on all types of equipment both above ground and under water. It is the only head that can be completely submerged and still cut just as well as above ground. You will be amazed at the strength and cutting ability of this attachment.

The mobility that you get while using a mini skid steer loader to cut roadsides is simply amazing. You can cut at 90 degrees to the ground, parallel to the ground or a full 45 degrees below grade so cutting deep into roadside ditches is a cinch.

This Mini Skid Steer Sickle Bar Cutter Features:

  • Mini Universal Attachment Plate (adapters available for almost any machine whether it be a skid steer or mini skid steer).
  • Hoses and Flat Face Couplers Included.
  • 5-Ft Pitman Style Sickle Bar Cutter by Eterra 
  • Electric over Hydraulic Control Valve.
  • A 3 foot arm matched to a 5 foot cutter gives the operator a full 6.5 feet of side cut (shorter if angled downward).
  • All electrical wiring and switch to control the angle of cut.
  • Sickle Cutter bar can cut up to 2” solid Oak.
  • No material thrown at the operator or bystanders.
  • Inexpensive to operate. New teeth cost just over a dollar.
  • Simple to maintain. Grease the Pitman arm and rotation joints.


Accept no imitations. Only the best in roadside cutters are produced by Eterra.


Warning:  Many people have asked if they can install this product on their tractors and full sized skid steer loaders.  It is not advisable because there is no break-away on this attachment so the full weight of your machine will come down on the cutter should you hit a solid item like a sign post or rock.  This will destroy the cutter and possible the boom arm.  None of this damage is covered under our extensive warranty.  If you choose to use this for unapproved uses, then you are on your own.  Please check out our full size sickle cutters for any of these applications.



Required GPM w/o hydrostatic drive:
Required GPM with hydrostatic drive:
8 - 15 GPM
Skid Steer Minimum Weight:
1000 lbs.
Arm Reach with 5 Foot Sickle:

Product Videos

Mini Skid Steer Sickle Bar and Pathway Mower | Eterra 02:32
  • Mini Skid Stee...
    The Eterra Sickle Bar Cutter for Mini Skid Steers [Toro, Boxer...

Skid Steer Solutions, Inc. offers a 1-Year Warranty on all attachments purchased from our website, please visit our warranty page for full details. To learn about our returns policy, please visit our Shipping and Returns page for the full details.

Review & Questions