EZ-Stumper 280L:

Designed for Skid Steer Loaders with Auxiliary Flow Hydraulics rated between 15 GPM and 25 GPM @ 3000 PSI .

One word, WOW!!!

Every grinder we have seen has been very complicated and scary to use. The EZ-Stumper does away with a lot of the issues attributed to regular stumpers. It is EZ to use and that is what counts. Landscapers can use this to go in and grind stumps into the ground with very little ground disturbance.

It has a 28" grinding wheel with 13 re-sharpenable and replaceable carbide bladed teeth that make fast work of any type of stump. It has a spring loaded full floating chassis that protects you from putting too much pressure on the unit which ensures maximum efficiency when grinding. If you still try to overload it, it features a bypass circuit so you cannot damage it.

The unit weighs in at 650 lbs. and is extremely well built. With this unit, you will be able to grind stumps down into the ground with little effort.

With the ease of use and the compactness, you will be able to access the smallest of properties and grind stumps quickly. It can even take down small trees and grind the stump at the same time. With full potential you will be able to make a lot of money with our grinder.

Our cutting force regulator prevents overloading of the carbide tipped cutting wheel, ensuring that grinding never stops. The EZ-Stumper can consume a 12-inch stump in minutes. Got a stump that is hard to get at? The EZ-Stumper can grind stumps within 6-inches of buildings or fences. Once installed on your skidsteer, our Stumper can grind a stump anywhere your skidsteer can reach. The EZ-Stumper requires no electrical connections and uses only standard accessory hydraulics. This product comes in a low flow model and high flow model. Please specify when ordering what your flow rate is.