This grapple was developed specifically based upon customer feedback.  A lot of people loved the design of the G2 Grapple, but wanted more tines so that the grapple could pick up smaller items.  Finally after some customers started having us quote extra tines that they would weld on themselves, we responded.

The G3 Grapple is the G2 only with 5 tines on the top and bottom.  The tines are exactly the same.  Nothing has been compromised in the design or function.  This grapple does weigh in at 1216 pounds so it is not for everyone.  You need a machine of at least 1750 lb. lift capacity to have an adequate payload. 

This grapple is ideal for demolition and clean up in confined spaces.  You can still tear out concrete as well as pick up the pieces.  Of course logging is still a cinch and what about heavy rock work?  Nothing is impossible with this grapple.  It is built to the high commercial standards that all of our equipment is.

Specifications:

• Material A572 Grade 50 Steel - 400 Burnell Hardened Tips - All US Steel
• 1 3/4 Inch thick x 5" deep spar
• 2 1/2" Diameter Pivot Shaft
• Width 38"
• Jaws open to 38" and overlap or scissor when closed
• All pivot surfaces are machined and are greasable
• All hardware is Grade 8
• 39,000 lbs. of mechanical pressure at the tips
• Weight - 1215 lbs.